Overview
The Stillness® and Purist® floor-mount bath filler faucets include a diverter which contains a hex hole to enable removal for servicing. Refer to the steps below to remove the diverter from the faucet body.
Remove the Diverter
- Disconnect the handshower hose from the diverter.
NOTE: You do not need to pull down on the diverter while unthreading it from the faucet body.
- Using a 12 mm hex socket and wrench, loosen the diverter counterclockwise.
- Remove the diverter.
Click Here For Maintenance And Service Parts
1267517-10-A ©Kohler Co.