Cabriole®
- Using a bladed screwdriver, gently pry off the plug button under the handle, taking care to protect all finished surfaces.
- Using a 1/8" hex wrench, loosen the setscrew securing the handle to the valve stem.
- Lift off the handle.
- Unthread the bonnet to expose the valve.
Paladar™
- Using a bladed screwdriver, gently pry off the cap, taking care to protect all finished surfaces.
- Using a Phillips screwdriver, remove the screw that attaches the handle to the valve stem.
- Lift off the handle.
- Unthread the nut to expose the valve.
Trocadero®
- Using a 3/32" hex wrench, unthread the setscrew attaching the lever to the valve stem.
- Lift off the handle, cap, and sphere to expose the valve.
Falling Water®
- Using a 1/8" hex wrench, unthread the setscrew securing the handle to the valve stem.
- Remove the handle.
- Unthread the cap to expose the valve.
Click Here For Maintenance And Service Parts
1230127-10-A ©Kohler Co.