Refer to the following directions to remove the handles for the widespread Cirrus bathroom faucet.
Lever Handle: (Fig. 1)
- Hold the handle while turning the skirt counterclockwise by hand or with a strap wrench, taking care to product all finish surfaces.
- Remove any remaining components to expose the valve.
- Set all parts aside for reuse.
- The valve can now be replaced or other repairs made.
- Reassemble handle parts in reverse order.
Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.
(Fig. 1)
Ball Handle: (Fig. 2)
- Gently pull off the handle and any remaining components to expose the valve.
- Set all parts aside for reuse.
- The valve can now be replaced or other repairs made.
- Reassemble the handle parts in reverse order.
Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.
(Fig. 2)
Click Here for Maintenance and Service Parts