To remove the handle for the widespread Alterna bathroom faucet or Alterna bidet faucet, refer to the following directions.
Cube, Lever, and Post-1997 Square Handle
- Hold on to the handle while turning the handle base or skirt counterclockwise by hand or with a strap wrench, taking care to protect the finish.
- Remove any remaining components to expose the valve. Set all parts aside for re-use.
- The valve can now be replaced or other repairs made.
- Reassemble handle parts in reverse order.
Pre-1997 Square Handle
- Gently pry off the plug button in the center of the handle using a thin flat blade screwdriver, taking care to protect all finish surfaces.
- Unscrew the Philips screw holding the handle to the valve stem.
- Gently pull of the handle and any remaining components to expose the valve. Set all parts aside for re-use.
- The valve can now be replaced or other repairs made.
- Reassemble handle parts in reverse order.
Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.