Refer to the following directions for removing the retainer ring and replacing the diverter for the Forte K-10430 or K-10434 Kitchen Faucet.
- Use a 5/32" hex wrench to remove the set screw from the back of the spout. Pull the spout up to remove it from the body (Fig. 1).
- On the underside of the spout that is removed, locate the silver colored retainer clip (Fig. 2).
- Pull the retainer clip out using a snap ring pliers or needle nose pliers (Fig. 3).
- Remove the diverter using a needle nose pliers (Fig. 4) and (Fig. 5).
- Install the new diverter and reassemble the faucet.
(Fig. 1) |
(Fig. 2) |
(Fig. 3) |
(Fig. 4). |
(Fig. 5) |