The part number and design of the aerator for the Revival faucet line has changed a few times through the life of the Revival series. Refer to the information below to determine the appropriate aerator for your faucet.
Installed prior to December 31, 2000:
The aerator part number was 57376 -** (Fig. 1) and has been discontinued along with the internal parts of the kit. The aerator kit, 1103464-** (Fig. 2), is the direct replacement at 1.5 gallons per minute (gpm) flow rate and a slight design change.
Installed January 1, 2001 - November 1, 2018: (California installations - see below if installed after January 1, 2001)
The correct aerator will depend on the gpm flow rate: the 1000952-** (Fig. 3) is 2.5 gpm and the 1108235-** is 1.5 gpm. The kits are interchangeable.
Installed January 1, 2001 - November 1, 2018:
The aerator kit 1272278-** is 1.2 gpm. This aerator is required for faucets installed in California due to water regulations.
(Fig. 1) |
(Fig. 2) |
(Fig. 3) |
Note: ** indicates a finish is required for the service part.
- BC: Bright Chrome (Use this finish for CP: Polished Chrome and G: Brushed Chrome faucets.)
- VU: Polished Brass
- SR: Polished Nickel, Brushed Nickel
- FB: French Gold
- BA: Brushed Bronze
Click Here for Maintenance and Service Parts
7/12/2021