Remove the Handle for Single-Control Alterna Bath and Shower Trim

To remove the handle for the single-control Alterna bath and shower faucet, refer to the following directions.

1. Hold on to the handle while turning the handle base counterclockwise by hand or with a strap wrench, taking care to protect the finish.
2. Remove the two screws holding the escutcheon plate with a Philips screwdriver. Set all parts aside for reuse.
3. Repairs can now be made to the shower valve.
4. Reassemble handle parts in reverse order.

Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.

Click Here for Maintenance and Service Parts